Overview

Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed components. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts with appropriate locking devices are suitable. Lock nuts are not supplied with the whithdrawal sleeves and must be ordered separately.

CCAS's withdrawal sleeves are slotted and have an external taper of 1:12 except for the AH 240 and AH 241 series which have an external taper of 1:30 and are intended for using with wide bearings of 40 and 41 series.

Technical Details:

Product Number: Withdrawal Sleeves

Series: AH 30 Series

Model Number: AH3052, AH3064, AH3072, AH3080, AHX3092, AHX30/500 etc.

Taper: 1:12

Material: Low Carbon Steel

Packaging: Neutral Packing

Features: High Precision with Long-life service 

Packaging of Adapter Sleeves, Withdrawal Sleeves, Lock Nuts, Locking Washers etc

CCAS has two factories and is your ideal bearing accessories supplier. 

Drawing of AH 30 Series Withdrawal Sleeves