FL850

SPECIFICATION:

Detection distance(<24℃): 2~11m

Detection range: 180°

Power sources: 220~240V/AC,110~130V/AC

Power frequency: 50~60Hz

Ambient-light: <10~2000Lux

Delay-time: 5S~7min±2min

Rated Load: 75W×1(max)

Installation height: 1.8m~2.5m

Working temperature: -20℃~+40℃

Working humidity: <93%RH

GENERAL:

This product is an energy-saving lamp, which can turn on when one comes and turn off when leaves. It can identify day and night automatically. It adopts infrared energy discharging detector, IC and SMD technology its performance is stable and reliable. When one enters the detection field and trigger it, the infrared sensor will work and make the lamp on. When leaves, the lamp will die out automatically.

INSTALLATION:

•  Connect the power source into the lamp according to connection-wire diagram (on the right) when you install it,

•  Select the specific installation position according to the following diagram

I.The detection angle (top view)

II.The strong detection field (arrow means one’s moving direction)

III.Poor detection field

IV.Detection distance and range (side view)

•  Installing process:

1) Unload the lamp holder, fix the base on the wall;

2) Connect the power source according to connection-wire figure on the bottom-pan;

3) Fix the lamp on the base, and then electrify it.